Ox Resin Epoxy Crack Repair is an ultra strong, pourable epoxy resin liquid crack filler. It is the ideal solution to penetrate, fill and seal fine cracks in concrete, brickwork or stone surfaces. The formula will cure harder than the concrete around it and provide a cost effective waterproof solution that stands the test of time.
Ox Resin Epoxy Crack Repair is most suitable for pourable or pressure injection crack repairs in concrete or brickwork, curing to extremely high strengths.
- Easy to Apply
- Cures stronger than concrete
- Professional Finish
- Extreme Durability
- Can be applied over a wide range of temperatures
- Ideal for cracks up to 2cm deep
- 100% Epoxy – Solvent Free
|Appearance||Clear, Jet Black or Grey|
|Composition||Low viscosity two part high strength epoxy resin, solvent free|
|Durability||Very heavy duty|
|Substrates||Concrete, cement, stone, brick, tarmac etc.|
|Product Components||Epoxy Resin Filler & Activator|
|Coverage||Maximum 6m @ 12mm x 12mm (1kg unit)|
|Typical Installations||Concrete crack repair, concrete crack injection, epoxy anchoring for bolts etc. Also seals/strengthens weak/porous stone, concrete & brickwork|
No fuss filler for concrete cracks in floors, steps, patios and paving.
Ox Resin Epoxy Crack Repair is ideal for cracks up to 2cm deep. Repairing small concrete cracks can be hugely cost effective in the long run as over time cracks will expand and cause the concrete around them to weaken and possibly become dangerous. With this product you can quickly repair the crack with a professional finish and a curing time of under 24 hours.
How to repair concrete cracks:
Resincoat Epoxy Crack Repair is supplied as a two-part epoxy product. This gives you the advantage of starting with a pourable liquid filler that will chemically activate and become a strengthened solid that will bond to the concrete around it and create a stable surface. Ensure your surface is dry to begin with, for surfaces that are damp or wet consider Ox Resin Moisture Tolerant Crack Filler. Clean the crack using a wire brush to remove any potential contamination. Then, thoroughly mix together parts A & B of your Epoxy Crack Repair and simply pour the formula into the crack distributing evenly as you go. Please note that once mixed, the product should be poured within its 20 minute pot life.